FILSTER (PET Monofilament)
AVAILABLE ALSO IN THE NO FLAME TYPE (V0)
This monofitament type is widely used for technical applications thanks to its particutar characteristics of low or even no humidity absorption that gives to it a very good dimensional stability, resistance to low and high temperatures, and a good resistance to abrasion.
FILSTER HT (high tenacity Polyester Monofilament)
This monofitament has a 40% higher tenacity than our standard polyester monofitament.
MAIN CHEMICAL AND PHYSICAL CHARACTERISTICS
Density: 1.38 g/cc
Melting temperature: 255° C — 260°C
Softening temperature: 240°C
(Ref. UL 94) HB horizontal burning
FILSTER ELAST (elastomeric Polyester Monofilament)
It has characteristics of a very high elastic elongation with a none inetastic residual. It is avaitable in several elasticity grades and also in the V0 type.
|RESISTENCE TO CHEMICAL AGENTS|
|Solvents organic acids||+|
|Solvents aromatic composed||+|
[+ Stable] • from stable to a limited stability [- Unstable]
# from a limited stability to unstable [° Limited stability]